Anywhere you need any volume of propane or diesel heat and you want the lowest cost solution.
BASECAMP may be our smallest heater, but don’t let its size fool you. Just one of these units replaces two traditional indirect flamed heaters, one Generator, and one Light Tower.
BASECAMP boasts 97% heating efficiency and 48 hours of continuous runtime.
At a dry weight of 3,700 lbs (1, 364 kg), it has a diesel capacity of 450 liters (118.8 US gallons). The Kubota 2.4 Litre Electronic Tier 4 Final engine is complemented by an air-to-air exhaust heat exchanger, primed for optimal performance.
BASECAMP XL strikes the perfect balance between size and performance. Just one of these units replaces three traditional indirect flamed heaters, one Generator, and one Light Tower.
BASECAMP XL boasts 95% heating efficiency and a run-time of over 48 hours and is the best performing industrial heater of its size.
It has a diesel capacity of 680 liters (179.6 US gallons). The Kubota 3.8 Litre Electronic Tier 4 Final engine combines perfectly with simplified controls and an air-to-air exhaust heat exchanger to create a seamless heating experience.
BASECAMP, our ultra-efficient Flameless Heater, Light Tower & Generator is rented with the following premium features:
SmartTalk Wireless Technology monitors your heaters 24/7 for any items of concern: engine faults, low fuel, or failure to maintain remote thermostat set points are just a few of the factory installed SmartTalk presets. Say goodbye to endlessly patrolling your heaters for issues.
Cut refueling costs in half by combining our ultra efficient platform with a perfectly sized onboard fuel tank.
Recirculation is one way we achieve heater efficiency: our heaters draw in air from the heated environment. They’ll even draw waste heat from one area and repurpose it to another area. This feature can easily increase efficiencies by up to 75%.
With the addition of power generation in the Basecamp you can provide your worksite with (3) Twist Locks — 30 Amp and (3) GFI 20 Amp 120v power.
Replacing ducting every year is a thing of the past, thanks
to our custom-made, battle-tested Alpine ducting series.
Our standard ducting kit for each heater includes:
• (4) 25’ sections of 12” Alpine ducting
• (1) 10’ section of Alpine ducting
• (1) Alpine Fabric Splitter (Y)
Worksites are often overheated to offset falling outdoor temperatures and mitigate risk of heater failure. This significantly increases heat loss and fuel costs.
Save on fuel and reduce risk of heater failure with remote temperature control and monitoring. Monitor heater performance from anywhere, and set your temperature exactly where you need it.
Batteries remain the #1 problem with starting engines in cold weather. This option adds the protection of a second premium starter battery delivering double the cold cranking amps and the addition of a battery “Genius” to make sure your batteries can be maintained indefinitely just by plugging the heater into shore power. Whether it’s just a week of extreme cold during Christmas break, or the extended off season, you’ll be operating at full power! **Available only on Basecamp XL
20lb Fire Extinguisher, Mount and Cover
Even in extreme cold weather, your heater will start when you need it to.
By tightly controlling the combustion process, our modern electronic engines allow for longer life spans and longer
intervals between service. The electronics also continuously monitor engine safety, greatly reducing risk.
Know what’s going on with your heater, with a single, simple glance. Green means the heat is on. Yellow means the heat is on, but needs help. Red means unit down. Simple as that.
The nature of temporary heat is that jobs are always changing. That’s why we recommend storing ducting on the unit where you know you’re going to need it. One less thing to forget, and one less thing to find a place for.
Maintain worksite safety with an automatic valve to help prevent engine overspeed by cutting off air supply.
With our extended service package you can eliminate
in-season oil changes and reduce the risk of equipment downtime by maintenance being missed.
Worksites are too often dark and poorly lit leaving dark spots
for your workers and equipment. This option provides your worksite with a 25’ telescoping light tower and 192,000 lumens of 360° lighting.
Preventing contaminants from entering the heater cabinet during travel and storage is the simplest way to avoid unnecessary equipment depreciation.